Installation Instructions: Burkhart Chassis Manual Brake Kit Instructions 
This Product is for Off-Highway Use Only
 
 ***ALTERING THE BRAKE SYSTEM ON ANY VEHICLE CAN BE POTENTIALLY DANGEROUS AND/OR FATAL IF INCORRECTLY INSTALLED 
AND RESULTING IN LOSS OF BRAKES~THIS PRODUCT SHOULD ONLY BE INSTALLED BY EXPERIENCED/COMPETANT INDIVIDUALS~ONCE INSTALLED 
ALL RESPONSIBILITY IS ASSUMED BY PURCHASER***
  
Step 1. Remove the factory brake booster & master cylinder.
When converting to a manual brake system, the pedal ratio will need to be altered:

 
Step 2. Remove brake pedal assembly

 
Step 3. Drill 3/8” dia. Hole 1” above the factory booster rod mounting rivet

 
Step 4. Reassemble brake pedal assembly using aluminum firewall adapter included in this kit, 
and bolting the new master cylinder assembly to the firewall.

 
Any further questions can be answered by contacting us at sales@burkhartchassis.com, or 217-620-4877.


Thank you for your purchase!