|
|
 |
|
Burkhart chassis is expanding into the forced induction arena. we are not new to this but have placed a renewed emphasis
on building bolt in forced induuction components.
|
|
|
Burkhart Chassis is a Stainless Works dealer. We have access to the full line of products as well as raw tubing. Please
call us for your needs. We can make custom Turbo Hot Side piping from just headers to a full setup.
|
|
|
We are carrying the full line of Chiseled Performance parts. Contact us for any needs you have with intercoolers, water
tanks, trans coolers, or combo tanks. INTERCOOLER WATER TANKS: FEATURES: - CONTRUCTED FROM 6061T6 .090 ALUMINUM
- 100%
TIG WELDED
- 1" or 1-1/4" FEMALE NPT IN/OUT FITTNGS
- 1/2" FEMALE NPT DRAIN FITTING
- 6"
SCREW OUT LID FOR EASY ICE FILLING
- ANTI CLOG FILTER INCLUDED ON ALL
WATER TANKS
- MOUNTING TABS INCLUDED
- OPTIONAL IN TANK WATER PUMP DESIGN AVAILABLE USING RULE 10A OR 14A WATER PUMPS
Options are: Intank Pump Intank Trans Cooler 5 and
7 gallon capacity
1300HP Air To Air Intercooler - Garrett Bar and Plate Core
- Core
Measures 27.8x 12.7 x 5.1
- 1/8" 6061 Aluminum Sheetmetal Endtanks
- Can be made with in/out tubes in any configuration needed
- Comes Standard With 4" CNC in/out tubes
- Two
week ld time
 
AIR TO WATER INTERCOOLERS FEATURES: - CONSTRUCTED
FROM 1/8" 6061T6 ALUMINUM
- 100% TIG WELDED
- BAR AND PLATE CORES
- V-BAND FLANGE AVAILABLE AT EXTRA
CHARGE
- PRESSURE TESTED
- ALL
INTERCOOLERS COME WITH REINFORCING BRACES STANDARD
- Available in sizes
to support 1500, 2000, 3000, and 4000 HP
- V Band Flanges are available
TRANSMISSION ICE WATER COOLER - DRASTICALLY LOWERS TRANSMISSION FLUID TEMPS BY SUBJECTING THE TRANS COOLER WITH ICE
WATER FROM THE AIR TO WATER INTERCOOLER SYSTEM.
- CONNECTS INLINE BETWEEN
THE WATER RETURN LINE FROM THE INTERCOOLER AND THEN BACK TO THE WATER TANK.
- BY
HAVING A SEPARATE ENCLOSED SYSTEM FOR THE TRANS COOLER , WATER IN THE INTERCOOLER WATER TANK IS NOT HEATED DUE TO HEAT SOAK
FROM HAVING THE TRANS COOLER IN THE WATER TANK.
- 1/2" FEMALE NPT
FOR THE TRANS FLUID
- 3/4",1"or 1-1/4" FEMALE NPT WATER
IN/OUT FITTINGS
- MOUNTING TABS CAN BE ORDERED TO MOUNT HORIZONTALLY OR
VERTICALLY
- OVERALL SIZE : 12"L X 3"W X 10-1/2"H
- STAND ALONE UNIT AVAILABLE FOR NON TURBO CARS
 
STAND ALONE TRANSCOOLER - PERFECT FOR ALCOHOL OR NITROUS
CARS
- 12"W X 9"L X 9" H
- 4.2 GALLON CAPACITY
- 1/2" FEMALE NPT TRANS LINES
- 1/2" FEMALE NPT DRAIN FTG
FUEL AND WATER TANK COMBO UNITS  
FEATURES: - CONSTRUCTED FROM 6061T6 .090 ALUMINUM
- 100% TIG WELDED
- CUSTOM MADE FROM CUSTOMER SPECS
- FAX OR EMAIL US YOUR DRAWING FOR A CUSTOM QUOTE
- SAMPLE
DRAWINGS FOR A TYPICAL 5GL/5GL COMBO UNIT AVAILABLE FOR DOWNLOAD BELOW, JUST FILL IN FITTING AND LID LOCATIONS AND FAX OR
EMAIL TO US FOR QUOTE
|
|
|
|
|
Custom radiator setup incudes AFCO Radiator, Mezier remote pump, and block fittings. We can set up the lines for
you as well. The Radiator comes mounted in one of our bumper supports. Priced from 1475.00 with bare bumper support, radiator, pump, and block fittings. we can add powdercoat and lines
to your specs.
|
|
|
|
|
|
|
|
|
